Kyocera FS-1900 Service Manual page 155

Message
Load Cassette #
(paper size)/(paper type)*
*(paper size) and (paper type)
are displayed flashing
alternately.
Load MP tray
(paper size)/(paper type)
*(paper size) and (paper
type) are displayed flashing
alternately.
Missing
duplex drawer
Close sorter
rear cover
Close
stacker cover
Option interface
Error
: Alarm buzzer sounds when an error occurs. Press the CANCEL key to stop the alarm buzzer.
Corrective action
Paper whose size watches the size embedded in a print job is empty.
Set paper into the paper source as displayed on the operator panel,
and press the GO key to restart printing. The paper source number
(#) is only displayed when there is an optional paper feeder installed.
If you want to print from an alternative paper source press the
key or key to display Use alternative? and you can change
to another paper source. Further, you can change the paper source
by pressing the GO key.
After selecting a paper source and pressing the MENU key, Paper
handling > appears. By pressing the > key, the paper type setting
menu appears. After setting the correct paper type, press the ENTER
key and printing starts.
There is no paper cassette (paper size and paper type) that matches
the size embedded in a print job. Printing is done from the MP tray.
Set paper into the MP tray that matches the paper size and type
shown on the display and press the GO key to restart printing.
If you want to print from an alternative paper source, press the or
key to display Use alternative? and you can change to
another paper source. Further, you can change the paper source by
pressing the GO key.
After selecting a paper source and pressing the MENU key, Paper
Handling > appears. By pressing the > key, the paper type setting
menu appears. After setting the correct paper type, press the ENTER
key and printing starts.
The duplex drawer is either not installed or incorrectly inserted.
Insert the duplex drawer securely.
Open the stacker cover, then close tightly.
Open the sorter rear cover, then close tightly.
A failure has occurred with the (option) network interface card.
Check the (option) network interface card installed on the printer.
6-5
FS-1900