Zone Options / Zones 1-48 (Address 1200-1786) - NAPCO Gemini GEM-P3200 Programming Instructions Manual

WI1184B 2/06
ZONE OPTI ONS / ZONE S 1-4 8 (AD DRESS 120 0 -17 8 6)
1. Select the desired
zone option.
ZONE OPTIONS
◄
50ms Loop Response
NOTE: No circle = feature
10ms Loop Response
disabled.
Priority
Priority with Bypass
Auto-Bypass
NOTES: (A) 50ms & 20 ms Loop Response only available for zones 1-8.
(B) 2-wire Smoke Detectors only available for zones 1-8. If 2-wire Smoke Detector is selected, then Fire must
also be selected. See WI817 for more details.
(C) If Fire Alarm Verification is selected, then Fire must also be selected.
DEFAULTS: The zone options indicated are automatically set after exiting the Easy Menu Driven Mode.
Priority, Selective Bypass, Alarm Output, Auto Reset, Swinger Shutdown, Zone Area 1 and Zone Area 2 are
enabled for the total number of zones entered in
Alarm Telco 1 is enabled for the zones if [YES] is entered for "REPORT ALL ZONES TO CENTRAL ZONES? Y/N".
Entry/Exit 1 and Chime are enabled for zone numbers entered in
Exit/Entry Follower and Interior Bypass are enabled for zone numbers entered in
Fire, Pulse Alarm Output and Fire Verification is enabled for the zone numbers entered in
2-Wire Smoke Detector is enabled for zone numbers entered in
L
NAPCO Security Systems
2. Enable desired options
for each zone by drawing a
circle around its
corresponding binary data
value.
ZN04 ZN03 ZN02 ZN01
8 4 2 1
Draw Circle
"AREA 1 # ZONES = 08" and "AREA 2 # ZONES = 00"
3. Search table below
for data entry.
DIGIT VALUE DATA ENTRY DIGIT VALUE DATA ENTRY
.
8 4 2 1 Blank ( ) 8 4 2 1
8 4 2 1 1 8 4 2 1
8 4 2 1 2 8 4 2 1
3
8 4 2 1 8 4 2 1
4 8
8 4 2 1 4 2 1
8 4 2 1 5 8 4 2 1
6 8
8 4 2 1 4 2 1
7 8
8 4 2 1 4 2 1
.
"EXIT / ENTRY ZONES "
"INTERIOR ZONES"
"FIRE ZONES"
.
"2 WIRE FIRE ZONES"
Note: See "Number of Zones
& Keypads per Area" in Easy
Menu Driven program Mode.
X
GEM-P3200 Programming Instructions
Page 43
4. Enter data in
locations (left and right digits).
ADDRESS LOCATION
L ADDR R
8
blank (•) 1200 1
9
NOTE: Dark shaded data value box
0
shows option not available.
B
C
NOTE: See Direct Address
D
Programming Example
E
page 26.
F
.
.
.
address
on