Draytek Vigor3900 User Manual page 90
Multi-wan security appliance
Hide thumbs
Also See for Vigor3900:
- User manual (516 pages) ,
- Quick start manual (22 pages) ,
- User manual (460 pages)
Table of Contents
Advertisement
IPv6 Protocol
Enable Schedule
Reconnect
Schedule Time
Object
General Settings allows you to enable the profile, give a brief explanation for such profile,
specify the VLAN ID, specify MAC address, choose IPv4 and IPv6 protocol, and specify the
mode of the data transmission (NAT or Routing).
Note: The DMZ tab is available for WAN4 profile only.
Different IPv4 and IPv6 protocol types specified will bring up different configuration web
page.
If you choose Static as IPv4 protocol type, click the Static Tab to open the following
page:
Available parameters are listed as follows:
Item
IP Address
Subnet Mask
There are four connection modes for you to specify for IPv6
protocol type. Each mode will bring up different web page.
Enable – Click it to enable the function of reconnecting the
network automatically within the time schedule.
Disable – Click it to disable the schedule reconnect function.
Choose the time object profile to be applied by such WAN.
Description
Type the IP address specified for such profile.
Use the drop down list to choose the subnet mask for such
profile.
82
Vigor3900 Series User's Guide
Advertisement
Table of Contents
Troubleshooting
