Draytek Vigor3900 User Manual page 182

Available parameters are listed as follows:
Item
Profile
Enable
WAN Profile
Address Type
Private IP
Private IP subnet
Mask
Source IP Object
Source IP Group
Protocol
Description
Type the name of the profile.
Check the box to enable the Address Mapping profile.
Choose the active WAN interface for such entry.
Choose Subnet or Object as the address type. Related
setting options will be displayed later.
It is available when Subnet is selected as Address Type.
Type the private IP used for this entry.
It is available when Subnet is selected as Address Type.
Type the subnet mask used for this entry.
It is available when Object is selected as Address Type.
Use the drop down list to specify one IP object for such
profile. If there is nothing to be specified, simply open
Object Settings to create the one you want.
It is available when Object is selected as Address Type.
Use the drop down list to specify one IP group for such
profile. If there is nothing to be specified, simply open
Object Settings to create the one you want.
Choose the protocol used for the entry.
174
Vigor3900 Series User's Guide