Draytek Vigor3900 User Manual page 140

MAC Address
User Name
IP Address
Up Time
RX Bytes
TX Bytes
4 . 2 . 2 . 2 G e n e r a l S e
4 . 2 . 2 . 2 G e n e r a l S e
Available parameters are listed as follows:
Item
PPPoE Server
PPPoE User Isolation
Deny Internet Access
Except PPPoE User
Access Concentrator
(AC) Name
Service Name
Primary DNS
Display the MAC address of the client's host.
Display the user name used to access into the PPPoE server.
Display the IP address of the client's host.
Display the time that the PPPoE connection built.
Display the total amount of received packets.
Display the total amount of transmitted packets.
t t i n g
t t i n g
Description
Disable – Click it to disable this function.
Enable – Click it to enable the function of PPPoE server.
Disable – Click it to disable this function.
Enable – Click it to isolate the PPPoE users who access into
Internet via Vigor router..
Disable –Click it to disable this function.
Enable – If you click Enable, only the PPPoE user can
access into Internet.
Type the name which will be reported as the access
concentrator name.
Type a specific string for authentication.
It causes the named service to be advertised in a Service
Name tagged in the PADO ( PPPoE Active Discovery
Offer ) frame.
Type an IP address as primary DNS.
132
Vigor3900 Series User's Guide