Draytek Vigor3900 User Manual page 400

Item
Enable
ACS server on
Auto Failover to Active
WANs
ACS Server URL/
ACS Server Username /
ACS Server Password
Last Inform Response
Time
ACS Connection Status
Port
CPE URL
Periodic Status
Periodic Time
CPE Username
CPE Password
Turn on log message to
syslog
Periodic Status
Periodic Time
Apply
Cancel
Enter all of the settings and click Apply.
Description
Check this box to enable such profile.
Choose one of the WANlLAN profiles which will be
recognized by VigorACS.
Specify the WAN interface to take over the job of network
connection when the original WAN interface fails.
Such data must be typed according to the ACS (Auto
Configuration Server) you want to link. Please refer to Auto
Configuration Server user's manual for detailed information.
Display the response time informed by VigorACS.
When it lights in green, it means the router has been detected
and can be managed by VigorACS.
Type the port number for Vigor3900 which will be
recognized by VigorACS.
Display the URL of such CPE.
The default setting is Enable. Please set periodic time for
VigorACS to send notification to CPE. Or click Disable to
close the mechanism of notification.
Set the time for VigorACS to send notification to CPE.
Type the user name for the CPE which will be used by the
administrator of VigorACS to log into the WUI of
Vigor3900.
Type the password for the CPE which will be used by the
administrator of VigorACS to log into the WUI of
Vigor3900.
The default setting Disable. Click Enable to make the log
message being recorded by Syslog.
The default setting is Enable. Please set periodic time for
VigorACS to send notification to CPE. Or click Disable to
close the mechanism of notification.
Set the time for VigorACS to send notification to CPE.
Click it to save the configuration.
Click it to discard the settings configured in this page.
392
Vigor3900 Series User's Guide