Draytek Vigor3900 User Manual page 222

Item
Address Pool
H o w t o c r e a t e a n
H o w t o c r e a t e a n
1. Open Objects Setting>>IPv6 Object.
2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item
Profile
Address Type
Address Pool
Apply
Cancel
4. Enter all of the settings and click Apply.
A new IPv6 Object profile has been created.
Description
Display the IP address/ IP range /subnet of the object.
e w I P v 6 O b j e c t p r
e w I P v 6 O b j e c t p r
Description
Type the name of the object.
There are three types:
List – Allow to specify IP address.
Range – Allow to specify a range of IP addresses.
Subnet – Allow to specify subnet mask.
This field allows you to type IP address, specify Tag number
and type subnet mask based on IPv6 protocol.
Tag is an optional field only used for user to distinguish the
name/usage of the defined address.
Click it to save the configuration.
Click it to exit the dialog without saving anything.
214
o f i l e
o f i l e
Vigor3900 Series User's Guide