Draytek Vigor3900 User Manual page 123

I n t e r f a
I n t e r f a
This page allows you to modify the status (enable / disable), speed(Auto,10M,100M,1000M)
and duplex (Half/Full) for the WAN ports respectively.
Each item will be explained as follows:
Item
Edit
Vigor3900 Series User's Guide
c e C o n f i g u r a t i o n
c e C o n f i g u r a t i o n
Description
Choose the interface listed below and click the Edit button
to modify the settings. A pop up window will appear for you
to change the settings.
Interface – Display the name of WAN interface.
Enable – Check it to enable such interface.
Speed – Use the drop down list to specify the transmission
rate (Auto, 10M, 100M or 1000M) for such interface.
Flow Control – Click Enable to enable such function. When
the data cache is approaching to full load, Vigor router will
pause transmitting the packets till the system is able to
accept new data again. It can avoid the network traffic
congestion.
115