Draytek Vigor3900 User Manual page 113

Object
Load Balance Pool
/WAN Profile
Failover to the
Default Route
Vigor3900 Series User's Guide
Destination IP Address - Type a WAN IP address here as
the destination IP address for such rule.
– click the icon to clear the IP setting.
Destination Mask- Use the drop down list on the right to
choose a suitable mask for the destination.
Source IP Object – Use the drop down list to choose one of
the source IP objects for such rule profile.
Source IP Group –Use the drop down list to choose one of
the source IP group for such rule profile.
Destination IP Object – Use the drop down list to choose
one of the destination IP objects for such rule profile.
Destination IP Group - Use the drop down list to choose
one of the destination IP group for such rule profile.
Destination DNS Object – Use the drop down list to choose
one of the DNS objects for such rule profile.
Choose one of the profiles to be used by such rule. In which,
wan1 to wan5 profiles are configured in default. In addition,
profiles configured in WAN>>Load Balance Policy>> Pool
page also will be displayed here.
To have user-defined WAN profile, please refer to
WAN<<General Setup for detailed information.
When the specified interface disconnects due to some reason,
the router can use the default route to perform data
transmission.
105