Draytek Vigor3900 User Manual page 195

Available parameters are listed as follows:
Item
Profile
Enable
Block Action
Next Group
Syslog
Input Interface
Output Interface
Time Schedule
Service Protocol
Vigor3900 Series User's Guide
Description
Type the name of the IP filter rule.
Check the box to enable this profile.
The action to be taken when packets match the rule.
Block - Packets matching the rule will be dropped
immediately
Pass - Packets matching the rule will be passed immediately.
Block_If_No_Further_Match - A packet matching the rule,
and that does not match further rules, will be dropped.
Pass_If_No_Further_Match - A packet matching the rule,
and that does not match further rules, will be passed through.
When you choose Block_If_No_Further_Match or
Pass_If_No_Further_Match as Block Action, you have to
specify next IP filter group for further matching.
Click Enable to make the history of firewall actions
appearing on the System Maintenance >> Syslog/Mail
Alert >> Syslog File.
Choose one of the LAN or WAN profiles as data receiving
interface.
Choose one of the LAN or WAN profiles as data
transmitting interface.
Time Object - Click the triangle icon
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
new time object profile.
Time Group - Click the triangle icon
profile selection box. Choose a schedule group profile to be
applied on such rule. You can click
new time group profile.
Service Type Object –Click the triangle icon
the profile selection box. Choose one or more service type
object profiles from the drop down list. The selected profile
187
to display the
to create another
to display the
to create another
to display