Draytek Vigor3900 User Manual page 181

WAN Profile
Source IP Object
Source IP Group
Private IP
Private IP Subnet Mask
Protocol
IP Alias
Failover Status
Failback
H o w t o
H o w t o
1. Open NAT>> Address Mapping.
2. Simply click the Add button.
3. The following dialog will appear.
Vigor3900 Series User's Guide
Display the WAN profile that such address mapping profile
will be applied to.
Display the source IP object profile name.
Display the source IP group profile name.
Display the private IP used for this entry.
Display the subnet mask used for this entry.
Display the protocol used for the entry.
Display the selected WAN IP address.
Display if failover to the default route is enabled or disabled.
Display if the function of Failback is enabled or disabled.
a d d a n e w A d d r e s
a d d a n e w A d d r e s
s M a p p i n g p r o f i l e
s M a p p i n g p r o f i l e
173