Draytek Vigor3900 User Manual page 372

Name
Action
Schedule
Start Date /
End Date
Start Time /
End Time
Weekdays
Usually, the name of the device will be assigned by
Vigor3900 automatically. If you want to give a name easy
for easy recognition, refer to 4.11.2.1 CPE Maintenance to
specify another name for the device additionally.
Display the name (can be modified by the administrator) of
the device.
There are three actions for you to choose for such profile.
Firmware Upgrade – It means such profile will be used for
firmware upgrade.
Configuration Backup – It means such profile will be used
for configuration backup of the selected CPE.
Configuration Restore – It means such profile will be used
for restoring the configuration of the selected CPE.
The new created profile can be applied to the selected CPE
based on the schedule configured here.
Now – The action will be performed for the selected CPE
immediately.
Once – The action will be performed for the selected CPE at
the specified time, and will be done for once.
Weekdays – The action will be performed for the selected
CPE at the time and date specified below every week.
It is available only when Once is selected as Schedule.
Specify the starting date /ending time with the format
YYYY-MM-DD.
It is available only when Once is selected as Schedule.
Specify the starting date /ending date with the format
YYYY-MM-DD.
It is available only when Weekdays is selected as Schedule.
Simply check the day you want.
364
Vigor3900 Series User's Guide