Draytek Vigor3900 User Manual page 32
Multi-wan security appliance
Hide thumbs
Also See for Vigor3900:
- User manual (516 pages) ,
- Quick start manual (22 pages) ,
- User manual (30 pages)
Table of Contents
Advertisement
6.
Click Add under the Pool tab to create a profile (e.g., WAN1WAN2) for automatic
Load Balance between WAN1 and WAN2. Choose Load_Balance as the Mode
option.
Click Add to configure the interface. Setup the Weights (e.g, "1") of WAN1 and
WAN2 respectively as you want. In this case ratio of WAN1 and WAN2 is 1:1. Also,
you can type 2 and 1 for WAN1 and WAN2, then the ratio of line speed of WAN 1and
line speed of WAN 2 will be 2:1.
7.
After clicking Apply, the created profile will be shown on the screen.
8.
Open WAN >> Load-Balance and click the Rule tab.
9.
Click Add to create a profile for Rule1 accepting the data coming from 192.168.1.0/24
which always goes Internet via WAN1 when WAN1 is up. Type the information
specified for such rule. (e.g., Rule1 for Profile; 192.168.1.0 for Source IP Address;
24
Vigor3900 Series User's Guide
Advertisement
Table of Contents
Troubleshooting
