Draytek Vigor3900 User Manual page 410

Available parameters are listed as follows:
Item
Enable
Get Community
Set Community
Default Host IP/Mask
Notification Host IP
Enable SnmpV3
USM User
Auth Algorithm
Auth Password
Privacy Algorithm
Privacy Password
Apply
Cancel
Enter all of the settings and click Apply.
Description
Check the box to enable such profile.
Set the name for getting community by typing a proper
character. The default setting is public.
Set community by typing a proper name. The default setting
is private.
Click Enable to use the default IP and mask of the host as
the SNMP agent.
If you click Disable, you need to type the IP address and
choose the mask manually in related fields.
Type the IP address of the host for notification.
Click Enable to enable this function.
USM means user-based security mode.
Type a username which will be used for authentication. The
maximum length of the text is limited to 23 characters.
Choose one of the encryption methods listed below as the
authentication algorithm.
Type a password for authentication. The maximum length of
the text is limited to 23 characters.
Choose one of the methods listed below as the privacy
algorithm.
Type a password for privacy. The maximum length of the
text is limited to 23 characters.
Click this button to save the configuration and exit the web
page.
Click it to discard the settings configured in this page.
402
Vigor3900 Series User's Guide