Using The Rotating Media Supply Hub - Intermec PM4i User Manual

Chapter 1 — Using the Printer

Using the Rotating Media Supply Hub

30
In addition to the standard media supply roll post, you can use an
optional rotating media supply hub. You can also use these optional
accessories:
• An adapter for media rolls with a 76 mm (3 in) core
• A media roll retainer that prevents the media roll from uncoiling
A paper low sensor that detects when the remaining supply of
•
media reaches a predetermined level
Paper sensor
This illustration shows the various options that can be used with the rotating
media supply hub.
To load media on the rotating media supply hub
1 (Optional) Install the 3-in adapter core.
2 Slide the media roll onto the rotating hub. Make sure to push the
roll all the way on the hub so that the roll is flush with the disc on
the inside of the hub.
3 (Optional) Install the retainer.
Rotating hub
3-inch adapter
PM4i Mid-Range Printer User's Manual
Retainer