Intermec PM4i User Manual page 28

Chapter 1 — Using the Printer
14
7 Adjust the position of the green edge guide so the media is guided
with a minimum of play. Lock with the nut.
8 Adjust the position of the edge guide on the label slack absorber
according to the width of the media.
Label slack
absorber
Edge guide
9 Close the front door and media cover, making sure that the media
runs through the slot in the front door.
10 Press the B button to advance the media and adjust the media
feed. Tear off the media by pulling it downwards.
PM4i Mid-Range Printer User's Manual
Edge guide
Nut