Troubleshooting Printer Problems And Finding Solutions - Intermec PM4i User Manual

IPL Error Messages (continued)
Message Description
IP configuration error. The printer is trying to
acquire an IP address from the network. Wait for the
printer to complete the task before taking any
action.
No Printhead Printhead not found
Rebooted
Initializing
Printer crash. In most instances, when the printer
crashes, the screen is reset which causes the Intermec
Ready-to-Work indicator to turn off.
Printer turned off
Maintenance
Psu Over Power supply over temperature
Temp
Printhead Hot The printhead is overheated and needs to
cool down. Wait for printing to resume
automatically.

Troubleshooting Printer Problems and Finding Solutions

Print Quality Problems and Possible Solutions
Problem
The printout is weak, overall.
The printout is weaker on one side. Adjust the pressure arm. For help, see
PM4i Mid-Range Printer User's Manual
Chapter 4 — Troubleshooting and Maintaining the Printer
Use this section to find possible solutions to printer problems.
Possible Solution
Try these possible solutions in order:
•
Make sure that your media setting is appropriate for the
type of media you are using.
•
The contrast may be too low. Try increasing the contrast.
•
The printhead pressure may be too low. Increase the
printhead pressure. For help, see
Printhead Pressure" on page
•
Replace the printhead. For help, see
Printhead" on page
Pressure Arm" on page
Ready-to-Work
Indicator Status
Blinking
Off
Off
Off
Off
Off
Off
Off
Off
"Adjusting the
102.
"Replacing the
111.
"Adjusting the
98.
Error
Number
91