Chapter 8—Options
Integral Liner Takeup Unit
The integral liner takeup unit is an optional device for peel-off (self-strip)
operation, which means that the labels are separated from a liner (back-
ing paper) after printing and the liner is wound up on an internal hub.
The unit also includes a guide shaft. Peel-off cannot be combined with
an internal fan-fold guide. Also see Chapter 4, "Media Load, Peel-Off."
Paper Cutter
The paper cutter is designed to cut off continuous paper-based stock or
liner between labels. The cut-off labels, tickets, or tags can be collected
on an optional tray. Also see Chapter 4, "Media Load, Cut-Off."
Media Supply Hub
The rotating media supply hub is designed to fi t media roll cores with an
internal diameter of 38-40 mm (1.5 inch).
Media Roll Retainer
The retainer is intended to keep large media rolls in place when using a
rotating media supply hub. It restricts the maximum media width to 100
mm (3.9 inches). Installed by the operator.
3-inch Adapter
The 3-inch/76 mm adapter is used with a rotating media supply hub and
makes it possible to use media rolls with 3 inch/76 mm inner diameter
cores. The adapter is pressed onto the hub and secured by a screw. Not
used with a media supply roll post. Installed by the operator.
Label Taken Sensor
The Label Taken Sensor (LTS) is a photoelectric sensor that enables the
printer's fi rmware to detect if the latest printed label, ticket, tag, etc. has
been removed before printing another copy. The LTS cannot be used in
connection with a paper cutter.
Intermec EasyCoder PM4i—User's Guide (IPL version)
61