Power Supply; Memory; Description - Compaq ProLiant DL320 Maintenance And Service Manual

Hide thumbs Also See for ProLiant DL320:
Table of Contents

Advertisement

Power Supply

Table 5-2: Power Supply Specifications
Item
Input voltage specifications
Rated input voltage
Rated input line
Frequency range
Rated input power
Rated input current
Steady state power
Maximum peak power
Ambient temperature range
Operating
Non-operating
Relative humidity (non-condensing)
Operating
Non-operating
Dielectric voltage withstand
Input to output
Input to ground
Maximum wet-bulb temperature

Memory

Table 5-3: SDRAM DIMM Specifications
Item
Size
Speed
Width
Upgrade requirement
Note: Use only 64-, 128-, 256-, 512-MB, registered, 72-bit wide, 3.3-volt, registered ECC SDRAM.
SDRAM must be 133 MHz or faster. Use Compaq SDRAM only.
Compaq ProLinat DL320 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: DarkStar-T Part Number: 203834-003 Last Saved On: 12/13/01 5:19 PM

Description

100 VAC to 240 VAC
180 VAC to 264 VAC (90 VAC to 132 VAC)
47 to 63 Hz
298 W
3.3 A, 1.7 A (110 V, 220 V)
180 W
200 W for 2 minutes
5°C to 50°C (41°F to 122°F)
-40°C to 85°C (-40°F to 185°F)
5% to 95%
5% to 95%
3000 VAC/minute
1500 VAC/minute
28°C (82°F)
Description
64-, 128-, 256-, or 512-MB
133-MHz speed minimum
72 bits
Any combination of SDRAM DIMM (minimum
128 MB total memory required)
Specifications
5-3

Advertisement

Table of Contents
loading

Table of Contents