IMPORTANT: Observe the color of your heat sink to identify the correct replacement heat sink later in
this procedure.
11. Remove the processor. See "Processor" in this chapter.
12. Identify the alignment keys and keyhole locations
Figure 2-37: Identifying alignment keyhole locations
Compaq ProLiant 320 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: DarkStar-T Part Number: 203834-003 Last Saved On: 12/28/01 9:29 AM
CAUTION: Always use a new thermal pad and a new heatsink when replacing processors on
the system. Failure to use new components may result in damage to the processor. See
"Processor" in this chapter.
4
3
2
1
Removal and Replacement Procedures
through
on the system board.
5
6
2-45