Center Wall - Compaq ProLiant DL320 Maintenance And Service Manual

Removal and Replacement Procedures

Center Wall

To remove the center wall:
1. Power down the server. See "Powering Down the Server" in this chapter.
2. Remove the access panel. See "Access Panel" in this chapter.
3. Remove the PCI riser board assembly. See "PCI Riser Board Assembly" in this chapter.
4. Disconnect the center wall fan cables from the fan connectors on the system board
5. Loosen the center wall thumbscrew
Figure 2-24: Removing the center wall (processor removed for
clarity)
2-30
COMPAQ CONFIDENTIAL Codename: DarkStar-T Part Number: 203834-003 Last Saved On: 12/28/01 9:29 AM
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal
system components to cool before touching them.
1
2
.

1
1
Compaq ProLiant 320 Server Maintenance and Service Guide
.