Compaq ProLiant DL320 Maintenance And Service Manual page 53

Removal and Replacement Procedures
To remove the battery:
1. Power down the server. See "Powering Down the Server" in this chapter.
2. Remove the access panel. See "Access Panel" in this chapter.
3. Locate the battery on the system board.
Figure 2-33: Locating the battery
4. If necessary, remove the PCI riser board assembly to access the battery location. See
"PCI Riser Board Assembly" in this chapter.
5. Press the battery forward from the clip side of the assembly to slide the battery up and out
of the battery holder.
Figure 2-34: Removing the battery
2-40
COMPAQ CONFIDENTIAL Codename: DarkStar-T Part Number: 203834-003 Last Saved On: 12/28/01 9:29 AM
Compaq ProLiant 320 Server Maintenance and Service Guide