Table of Contents
Advertisement
NS-40D510MX15_14-0757_MAN_V1_ENG.book Page 70 Friday, August 8, 2014 10:31 AM
Insignia 40" LED TV
Problem
Solution
Trouble
• See instructions and a table of
programming
common codes in "Programming
your existing
universal remote controls" on
universal
page 75.
remote
• Codes are subject to change. For
control.
up-to-date codes, go to
www.insigniaproducts.com/remotecodes
• Replace dead batteries with new
batteries. Refer to the User Guide
that accompanied your universal
remote control.
• Refer to the User Guide that
accompanied your universal
remote control and contact the
manufacturer if problems persist.
General
Problem
Solution
No power.
• Make sure that the power cord
is correctly connected to your
TV and a power outlet.
• Unplug the power cord, wait 60
seconds, then plug the cord
back in and turn on your TV.
• Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
"No signal"
• Press INPUT and make sure that
error message is
you have selected the correct
displayed.
input for the device or service
you are trying to use.
• If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
• Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
After Auto
• Reception can vary by channel
Channel Search,
depending on the broadcast
there are no
power level of a given station.
channels.
Contact your cable or satellite
TV provider.
• Make sure that the antenna or
cable/satellite TV is connected
securely to your TV.
• Try replacing the cable between
the antenna/cable or
cable/satellite box and your TV.
70
Problem
When I press
INPUT, I cannot
select my
device (it is
grayed out).
One or more
channels do not
display.
Password is lost.
Some settings
cannot be
accessed.
TV cabinet
creaks.
Control buttons
do not work.
www.insigniaproducts.com
Solution
• Turn on the device. Your TV
automatically detects and
displays which video jacks have
devices connected to them
when the devices are turned on.
• Turn off Auto Input Sensing. See
"Turning Input Sensor on or off"
on page 64.
• Make sure that the channels are
not blocked. See "Setting
parental control levels" on
page 57.
• Make sure that the channels are
not hidden. The channel may
have been deleted from the
channel list. You can tune to the
channel by pressing the
number buttons or you can add
the channel back to the channel
list. See "Hiding channels" on
page 53.
• If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
• Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
• If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
"Checking the digital signal
strength" on page 55.
• Enter 9999 to access parental
controls, then set a new
password. See "Setting or
changing the password" on
page 55.
• If a setting is grayed, the setting
is not available in the current
video input mode (for example
TV mode). Change to a different
video input source. See
"Selecting the video input
source" on page 38.
• When the TV is in use, the
temperature rises naturally and
may cause the cabinet to
expand or contract which can
cause a creaking noise. This is
not a malfunction.
• Make sure that the Button Lock
option is set to Off. See
"Locking control buttons" on
page 56.
• Unplug the power cord, wait a
few seconds, then plug the cord
back in and turn on your TV.
Advertisement
Table of Contents
