Table of Contents
Advertisement
NS-40D510MX15_14-0757_MAN_V1_ENG.book Page 41 Friday, August 8, 2014 10:31 AM
Switching back to the connected device
1 Press INPUT, then press
HDMI 2 (MHL/ACC).
OR
Press MENU, then press
MHL/ACC.
2 Press ENTER to access your MHL-enabled
device. Your device's menu opens.
Note
Your device's menu will vary depending on
the device and the Apps you have loaded
on the device.
Using INlink
or
to select
or
to highlight
Turning INlink on or off
www.insigniaproducts.com
NS-40D510MX15 Insignia 40" LED TV
INlink lets you control HDMI CEC-compatible
devices connected to the HDMI jacks on your TV
using the remote control that came with your TV. To
use INlink, you must set the INlink Control setting
on the SETTINGS · INlink menu to On.
Notes
• HDMI cables must be used to connect
HDMI CEC-compatible devices to your TV.
• The connected device's HDMI CEC feature
must be turned on.
• If you connect an HDMI device that is not
HDMI CEC-compatible, none of the
INlink Control features work.
• Depending on the connected HDMI
device, some INlink Control features
may not work.
1 Press MENU. The on-screen menu opens.
2 Press
or
to highlight SETTINGS, then press
or ENTER. The SETTINGS menu opens.
3 Press
or
to highlight INlink, then press
ENTER. The SETTINGS · INlink menu opens.
4 Press
or
to highlight INlink Control, then
press ENTER.
5 Press
or
to highlight On or Off, then press
ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
41
Advertisement
Table of Contents
