Insignia NS-40D510MX15 User Manual page 78

NS-40D510MX15_14-0757_MAN_V1_ENG.book Page 73 Friday, August 8, 2014 10:31 AM
Problem Solution
My TV does not
• Make sure that the INlink
turn on when I
feature is turned on. See
turn on my
"Turning INlink on or off" on
device.
page 41.
• Make sure that TV Auto Power
On is set to On on the INlink
menu. See "Turning TV Auto
Power On on or off" on page 42.
• The device may not support this
feature. See the documentation
that came with the device for
more information.
The Audio
• When Audio Receiver is set to
Receiver
Off and INlink Control is set to
setting on the
On and you make an
INlink menu
adjustment to the audio
keeps turning
receiver (for example, turn the
back on after it
volume knob or press a button),
is turned off.
Audio Receiver is
automatically set to On. To
prevent this from happening,
turn off the INlink feature. See
"Turning INlink on or off" on
page 41.
Problem
Two volume
bars appear
when adjusting
the volume.
I cannot select
the Root Menu
option on the
INlink menu.
OR
The device's
root menu does
not open when
I select Root
Menu on the
INlink menu.
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your
TV, then turn it on again.
www.insigniaproducts.com
NS-40D510MX15 Insignia 40" LED TV
Solution
• When you adjust the volume on
the audio receiver or with the
TV remote control, a double
volume bar appears, one for the
TV volume and one for the
audio receiver volume.
• The device may not support this
feature. See the documentation
that came with the device for
more information.
73