Table of Contents
Advertisement
NS-40D510MX15_14-0757_MAN_V1_ENG.book Page 20 Friday, August 8, 2014 10:31 AM
Insignia 40" LED TV
Component video (better)
Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component
Audio cable
video cable
connectors
connectors
Component
Analog
video jacks
audio jacks
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect a component video cable (not provided) to the Y/VIDEO, P
to the COMPONENT OUT jacks on the DVD or Blu-ray player.
3 Connect an audio cable (not provided) to the L and R audio jacks on the back of your TV and to the L and R
AUDIO OUT jacks on the DVD or Blu-ray player.
Notes
• The Y/VIDEO, P
device) share the L and R audio jacks with the Y/VIDEO jack (used to
connect an AV (composite video) device).
• When you connect the audio using the L and R audio jacks, the audio
output is analog.
4 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
or
to select Component, then press ENTER.
20
DVD or Blu-ray player
Audio cable
Component
video cable
Back of TV
, and P
video jacks (used to connect a component
B
R
www.insigniaproducts.com
, and P
jacks on the back of your TV and
B
R
Advertisement
Table of Contents
