Analog Audio - Insignia NS-40D510MX15 User Manual

NS-40D510MX15_14-0757_MAN_V1_ENG.book Page 32 Friday, August 8, 2014 10:31 AM
Insignia 40" LED TV

Analog audio

When you connect an analog system or a sound bar to the
Analog speaker
On your TV
Sound bar
Audio cable
connector
/AUDIO OUT
jack
1 Make sure that your TV's power cord is unplugged and the analog speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the
jacks on the analog speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.
5 On your TV, set the Headphone/Audio Out option on the AUDIO menu to Audio Out Fixed or Audio Out
Variable. See the Headphone/Audio Out option in "Adjusting sound settings" on page 50.
32
system
/AUDIO OUT jack on the back of your TV and to the AUDIO IN
www.insigniaproducts.com
/AUDIO OUT jack, the TV speakers are muted.
Audio cable
Back of TV