Electrophotographic (EP) drive assembly removal
See
"EP drive assembly" on page 7-7
1.
Remove the paper tray.
2.
Remove the transport belt module and the developer units. See
page
4-154.
3.
Remove the cartridges.
4.
Remove the low-voltage power supply (LVPS). See
page
4-98.
5.
Disconnect the cartridge 1/fuser motor cable (two connectors) (A), and remove the cables from the cable
retainers (B).
for the part number.
"Low-voltage power supply (LVPS) removal" on
"Transfer module removal" on
Repair information
5026
4-69