Lexmark C734 Service Manual page 315

Hide thumbs Also See for C734:

Table of Contents

Installation note:

When installing the new LVPS, make sure the voltage switch (A) is set for the proper value (115 V or

230 V), depending on the country.

Note: Not all LVPS FRUs have a switch. Others are switched automatically.

Install the LVPS, and make sure the AC fuser cable is in the cable guides, and not behind the LVPS.

Reconnect the AC fuser cable to the LVPS.

Replace the five LVPS mounting screws.

Reconnect the cable in connector JLVPS1 on the system board.

Repair information