Lexmark C734 Service Manual page 174

5026
DEVICE TESTS (if hard disk or flash is installed)
Quick Disk Test
Disk Test/Clean
Flash Test
PRINTER SETUP
Defaults
PAGE COUNTS
Prt Color Pg Count
Prt Mono Pg Count
Perm Page Count
Serial Number
Engine Setting 1 through 4
Model Name
Configuration ID
Reset Color Cal
Par 1 Strobe Adj
Motor Calibration
EP SETUP
EP Defaults
Fuser Temp
DC Charge Adjust
Dev Bias Adj
Transfer Adjust
REPORTS
Menu Settings Page
EVENT LOG
Display Log
Print Log
Clear Log
EXIT DIAGNOSTICS
3-4
Service Manual
See "Quick Disk Test" on page
See "Disk Test/Clean" on page
See "Flash Test" on page
See "Defaults" on page 3-20.
See "Page Counts" on page
See "Serial Number" on page
See "Engine Setting 1 through 4" on page
See "Model Name" on page
See "Configuration ID" on page
See "Reset color calibration (Reset Color Cal)" on page
See "Parallel 1 strobe adjustment (Par 1 Strobe Adj)" on
page 3-21.
See "Motor Calibration" on page
See "EP Defaults" on page
See "Fuser temperature (Fuser Temp)" on page
See "DC Charge Adjust, Dev Bias Adj, Transfer Adjust" on
page 3-22.
See "Menu Settings Page" on page
See "Display Log" on page
See "Print Log" on page
See "Clear Log" on page
This selection exits Diagnostics mode, and Resetting the Printer
displays. The printer performs a POR, and returns to normal mode.
3-18.
3-19.
3-19.
3-20.
3-20.
3-20.
3-20.
3-20.
3-21.
3-22.
3-22.
3-22.
3-22.
3-23.
3-23.
3-21.