5026
Electrophotographic (EP) drive assembly removal
See
"EP drive assembly" on page 7-7
Remove the paper tray.
1.
Remove the transport belt module and the developer units. See
2.
page
4-168.
Remove the cartridges.
3.
Remove the low-voltage power supply (LVPS). See
4.
page
4-112.
Disconnect the cartridge 1/fuser motor cable (two connectors) (A), and remove the cables from the cable
5.
retainers (B).
Service Manual
4-82
for the part number.
"Low-voltage power supply (LVPS) removal" on
"Transfer module removal" on
Previous
Next
Go Back