Mounting The Switch On A Din Rail - Cisco Catalyst 3560-CX User Manual

On a DIN Rail
Step 2
Use the two number-10 Phillips pan-head screws to secure the DIN rail mount to the switch.
Figure 25: Securing the DIN-Mount Tray to the Switch
1 Switch

Mounting the Switch on a DIN Rail

Do not install the switch with its front panel facing up. Following safety regulations, install the switch
Caution
with its front panel facing down, to allow sufficient airflow and to provide easier access to the cables.
Catalyst 3560-CX and 2960-CX Switch Hardware Installation Guide
32
2 Number-10 Phillips pan-head screws
Switch Installation