Installing The Cable Guard (Optional) - Cisco Catalyst 3560-CX User Manual

Switch Installation
Step 6 Secure the AC power cord by pressing on the retainer.
Figure 34: Securing the Power Cord in the Retainer

Installing the Cable Guard (Optional)

The cable guard prevents tampering with the cables after the cables are installed. The cable guard
(CMPCT-CBLE-GRD=) is not included with the switch, but you can order it from your Cisco representative.
You can use the cable guard when the switch is mounted on a desk, under a desk, or on a wall.
Note
The cable guard is shipped with these items:
• Two 0.5 in. (12.7 mm) number-8 Phillips wood screws
• Two number-10 Phillips pan-head screws
• Two washers
Step 1 (Optional) Attach the supplied washers before you install the cable guard.
Catalyst 3560-CX and 2960-CX Switch Hardware Installation Guide

Installing the Cable Guard (Optional)

39