Mounting The Switch To A Din Rail Or To The Rack Adapter - Cisco IE-3000-8TC Getting Started Manual

Mounting the Switch to a DIN Rail or to the Rack Adapter

Step 1 If you are mounting the switch in a rack,
first secure the Cisco IE 3000 rack adapter
to the rack.
If mounting on a DIN rail, omit this step.
Step 2
Insert a flat-head screwdriver in the space
next to the tab, and turn the screw driver to
release the latch and push it out.
Step 3
If you are using a 15 mm DIN rail, rotate all
feet to the extended positions. Otherwise,
rotate the feet to the recessed positions.
Cisco IE 3000 Switch Getting Started Guide
16
Follow these steps to mount the switch on a DIN rail or in a rack.
Cisco IE 3000 Switch Getting Started Guide
Foot
Latch
OL-16234-01