Installing The Power Cord Retainer (Optional) - Cisco Catalyst 3560-CX User Manual

Installing the Power Cord Retainer (Optional)

Step 4
Insert the screws in the holes on the mounting tray or DIN rail mount, and tighten them.
Figure 29: Attaching the power adapter to the switch

Installing the Power Cord Retainer (Optional)

This section applies to switches with an AC power connector.
Note
The power cord retainer part number (PWR-CLP=) is optional. You can order it when you order your switch,
or you can order it later from your Cisco representative.
Step 1 Choose the sleeve size of the power cord retainer based on the thickness of the cord. The smaller sleeve can be snapped
off and used for thin cords.
Catalyst 3560-CX and 2960-CX Switch Hardware Installation Guide
36
Switch Installation