Cisco Catalyst 3560-CX User Manual page 51

Switch Installation
Step 3
Loosen the number-10 Phillips pan-head screws, slide the cable guide out, and pivot it upwards so that you can install
the cables.
Figure 37: Pivoting the Cable Guard Upwards
1 Cable guard
Step 4 Attach the cables to the switch.
Figure 38: Attaching the Cables to the Switch
1 Cables
2 Pivot direction for cable guard pivots
2 Pivot direction for cable guard pivots
Catalyst 3560-CX and 2960-CX Switch Hardware Installation Guide
Installing the Cable Guard (Optional)
41