Table of Contents
Advertisement
Chapter 13
13 3
Use L2TP/IPSec VPN to Access Your Home
Network
L2TP/IPSec VPN Server is used to create a L2TP/IPSec VPN connection for remote
devices to access your home network.
To use the VPN feature, you need to set up L2TP/IPSec VPN Server on your router, and
configure the L2TP/IPSec connection on remote devices. Please follow the steps below
to set up the L2TP/IPSec VPN connection.
Home Network
Step 1 Set up L2TP/IPSec VPN Server on Your Router
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
Note:
•
Firmware update may be required to support L2TP/IPSec VPN Server.
•
Before you enable
VPN
static IP address for router's WAN port and synchronize your
Router (VPN Server)
VPN Server
> L2TP/IPSec, and enable L2TP/IPSec.
Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
INTERNET
Remote Devices
System Time
with internet.
VPN Server&Client
71
Advertisement
Table of Contents
