Irc-6 Operation - Chauvet Freedom Strip HEX-4 User Manual

IRC-6 Operation

NOTE:
Freedom™ Strip Hex-4 User Manual Rev. 1
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1. Press <AUTO> on the IRC-6.
2. Press <+> or <–> to choose between the different auto programs.
To adjust the speed of the automatic program:
1. Press <SPEED> on the IRC-6.
2. Press <%>.
3. Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
·
Press <SOUND> on the IRC-6.
To adjust sound sensitivity in Sound-Active mode:
1. Press <SENSITIVITY> on the IRC-6.
2. Press <%>.
3. Press <+> or <–> to either increase or decrease sound sensitivity.
Manual Color Control
To choose a specific color with the IRC-6:
1. Press <MANUAL> on the IRC-6.
2. Press any number between <0> and <9> to choose your color.
To manually control the RGBWA+UV percentage:
1. Press <MANUAL> on the IRC-6.
2. Press <R>, <G>, <B>, <W>, <A>, or <UV> (red, green, blue, white, amber, or
ultraviolet) to choose your color.
Note: To use the white, amber, or UV color options, the fixture must be capable of
outputting that corresponding color light.
3. Press <+> or <–> to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press <STROBE> on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe rate.
3. Press <STROBE> again to turn off the strobe.
To fade the light output:
·
Press <FADE> on the IRC-6.
To black out the lights:
·
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is
pressed again.
The IRC-6 will not respond to any inputs when Black Out is activated. If the remote
does not respond when a button is pressed, try pressing <BLACK OUT>. You may
have inadvertently activated Black Out.
Page 21 of 25