Table of Contents
Advertisement
Mounting
Orientation
Rigging
Mounting Diagram
Freedom™ Strip Hex-4 User Manual Rev. 1
Before mounting the product, read and follow the safety recommendations indicated in the
Safety
Notes.
The Freedom™ Strip Hex-4 may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
·
Before deciding on a location for the product, always make sure there is easy access
to the product for maintenance and programming purposes.
·
Make sure that the structure onto which you are mounting the product can support the
product's weight. See the
·
When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss.
·
When rigging the product onto a truss, use a mounting clamp of appropriate weight
capacity.
·
When power linking multiple products, mount the products close enough for power
linking cables to reach.
·
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
(such as CH-05 from Chauvet)
Brackets as Floor
Threaded Mounting
Hole Size M12
Technical Specifications
for weight information.
Mounting Clamp
(such as the CLP-15N from Chauvet)
Safety Cable
Mounting
Supports
Bracket
Adjustment Knob
x 2
Page 11 of 25
Advertisement
Table of Contents
