Table of Contents
Advertisement
To DMX link a number of Freedom™ Strip Hex-4 using DMX cable:
DMX Linking
·
·
Then connect another DMX cable from DMX Out of the first product/slave to DMX In of the
next product/slave.
Continue connecting each subsequent product until all the products are part of the chain.
Information about DMX is in the DMX Primer, which is available from the Chauvet website
www.chauvetlighting.com/download/.
When DMX linking Freedom™ Strip Hex-4 products for Master/Slave operation, the
DMX controller is not a part of the DMX daisy chain and the master is the first
product in the chain. See Master/Slave Mode for details.
Starting
To ensure full access to all channels in each DMX mode, the highest recommended DMX
address is 495.
Address
DMX
When selecting a starting DMX address, always consider the number of DMX channels the
selected DMX mode uses. If you choose a starting address that is too high, you could
Personalities
restrict the access to some of the product's channels.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the DMX personality and starting address, do the following:
1.
2.
3.
4.
Linking
Products
wireless DMX signal to DMX-
wirelessly or via DMX cable
Freedom™ Strip Hex-4 User Manual Rev. 1
connect the DMX cable from DMX Out of the board, to DMX In of the first product, or
connect the DMX cable from DMX Out of the master, to DMX In of the first slave.
Press <MENU> repeatedly until 6-CH (6-channel mode), 8-CH (8-channel mode),
12CH (12-channel mode), or 18CH (18-channel mode) shows on the display.
Press <ENTER> and d 1–d512 shows on the display.
Use <UP> or <DOWN> to select the starting address.
Press <ENTER>.
DMX Controller Board
Freedom™ Strip sends
compatible products
DMX Controller connected to
Wireless D-Fi™ Hub or FlareCON™
Wireless D-Fi™ Hub
DMX-compatible
Brand X product
To more DMX
compatible products
DMX-compatible
Brand X product
D-Fi™-compatible
product
Page 15 of 25
Advertisement
Table of Contents
