Irc-6 Infrared Remote Control; Irc-6 Operation - Chauvet Sgocker 90 IRC User Manual

IRC-6 Infrared
Remote Control

IRC-6 Operation

Shocker™ 90 IRC User Manual Rev. 1
The Shocker™ 90 IRC is compatible with the IRC-6 infrared remote control from
Chauvet. To enable or disable control with the IRC-6, do the following:
1. Press <MENU> repeatedly until SET shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select ON or OFF.
3. Press <ENTER>.
Be sure the IRC-6 remote is pointing directly at the product and there is nothing in
between the remote and the product.
The following buttons function with this product:
·
<W> - activates the output of the LEDs
·
<SOUND> - activates Sound-Active mode
·
<SENSITIVITY> - adjusts sound sensitivity
·
<STROBE> - controls strobe speed
·
<+> - increases values for controls as described above
·
<-> - decreases values for controls as described above
·
<BLACK OUT> - turns LEDs on/off
·
All other buttons on the remote have no function with this product.
The IRC-6 will not respond to any inputs when Black Out is activated. If the remote
does not respond when a button is pressed, try pressing <BLACK OUT>. You may
have inadvertently activated Black Out.
Page 13 of 18