Account Registration For Server; Using The Secure Web Portal; Skins; Screen-Saver - Lennox iComfort Wi-Fi Setup Manual

Account Registration for Server

Figure 33. Registration Screen
NOTE - This following information is customer setup
instructions and is shown here to allow the installer to
help walk the customer through the setup process.
After registering through your iComfort Wi-Fi
interface, go to the homeowners computer and locate the
email sent from the server:
Dear Customer,
Congratulations on your purchase of a Lennox iComfort thermostat! You
are only a few steps away from total control of your Lennox iComfort
system. Registering your thermostat will allow you to remotely access it
from anywhere in the world on any device with an Internet connection.
Please complete your Lennox iComfort registration by clicking the link
below:
Register
NOTE - if the customer has already setup an account,
click the "Click Here" button to access that account.
Click on the Register link; the screen (to the left) will appear.
Fill in the User Name and Password fields and check the agree
to terms and conditions box. Click Create User button.
A series of pages and prompts follows to provide guidance
through profile setup and user preference definitions.

Using the Secure Web Portal

Access all the great Wi-Fi enabled features on your iComfort
thermostat from our secure web portal.
www.myicomfort.com
After signing in, you'll be able to view your iComfort system
settings, adjust the temperature and view reminders and
alerts – just as you would on your iComfort thermostat at
home. With a familiar look and settings this simple, you should
feel right at home. Don't forget to check out the available Apps
and skins.
507343-01
From the web portal welcome page, you may also click on
links to launch an interactive demo or learn more about
iComfort.

Skins

By adding a skin and matching skin image screen-saver to
your iComfort Wi-Fi, you can coordinate it with the decor in any
room. Skins are available in many colors, patterns and
designs.
Skins can be ordered from nuvango.com
Go to Shop > All Products and scroll down to
EVERYTHING ELSE and select LENNOX ICOMFORT
After ordering the skin, the company will email the image file
(.jpg) to you. The frame skin will be mailed to you as well. The
®
thermostat
skin image can be uploaded to the iComfort Wi-Fi thermostat
from the consumer portal site (www.myicomfort.com) under
the tab "skins".

Screen-Saver

You can also customize the screen-saver by uploading your
own photo on
Image must be 800x480 DPI in JPG format.
HOW DO I TURN ON SCREEN-SAVER
1. From the thermostat Home screen, press
2. Press the display setting button.
3. Press the screen saver button.
4. From the pop-up menu, select either on for the default
screen-saver or skins for your custom uploaded image.
The skin picture will appear after 30 seconds of inactivity.
®
• When set to off, the screen stays on.
• When set to on, after 30 seconds of inactivity the
screen will go blank
• When set to skins and no skin or custom image has
been uploaded, the screen will display LENNOX after
30 seconds of inactivity. If a skin or custom image has
been uploaded, after 30 seconds of inactivity, the
image will be displayed.
Page 28
www.myicomfort.com under the tab "skins".
·
.