ENGLISH
Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
ON/STANDBY
1
ON/STANDBY
Turn off the power using
2
Press
ON/STANDBY
while simultaneously pressing
SURROUND MODE 1
.
3
Once the display starts flashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
86
SURROUND MODE 1
SURROUND MODE 0
.
SURROUND MODE 0
and