Page 1
Version simplifiée Simple Versión sencilla version Version basique Basic Versión básica version AV SURROUND RECEIVER Version avancée AVR-2311 Advanced Versión avanzada version Owner’s Manual Manuel de l’Utilisateur Manual del usuario “Part names and functions” Information (vpage 72) Informations “Nomenclature et fonctions“...
Page 2
ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA IMPOTANT SAFETY SAFETY PRECAUTIONS CAUTION: INSTRUCTIONS To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. CAUTION Read these instructions. The mains plug is used to completely interrupt the power supply to RISK OF ELECTRIC SHOCK Keep these instructions.
Page 3
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANCAIS DEUTSCH ENGLISH NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA ANGÅENDE ANVÄNDNINGEN WARNINGS WARNHINWEISE AVERTISSEMENTS AVVERTENZE ADVERTENCIAS WAARSCHUWINGEN VARNINGAR •...
Page 4
Batterier får absolut inte kastas i soporna eller brännas. Kassera dem enligt lokala bestämmelser z För att tillförsäkra god värmeavledning får utrustningen för kemiskt avfall. DENON EUROPE inte installeras i instängda utrymmen, som t.ex. en Denna apparat och de tillbehör som levereras med den uppfyller gällande WEEE-direktiv, med Division of D&M Germany GmbH...
ENGLISH Getting started Thank you for purchasing this DENON product. To ensure proper operation, please read these owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Contents Accessories Advanced version ·······························································32 Getting started ··············································································1...
ENGLISH Features Cautions on handling • Before turning the power switch on Fully Discrete, identical quality and power for all Auto setup function Check once again that all connections are correct and that there are 7 channels (135 W x 7ch) The unit is provided with an “Auto setup function”...
ENGLISH Simple version (Simple setup guide) Simple version Here, we explain the entire setup procedure, from unboxing the unit to using it in a home theater. The “Simple version” section provides the speaker installation, connection, and setup methods for the 7.1-channel system with surround back speakers.
Page 8
ENGLISH Install Connect NOTE This unit can perform 2.0/2.1 to 7.1-channel surround playback. Speakers • Connect so that the speaker cable core wires This page provides the speaker installation procedure for the do not protrude from the speaker terminal. The protection circuit may be activated if the 7.1-channel playback using surround back speakers as an example.
Page 9
ENGLISH Connect Blu-ray Disc player and TV Use only an HDMI (High Definition Multimedia Interface) cable that bears the HDMI logo (a certified HDMI product). Using a cable without the HDMI logo (an uncertified HDMI product) may result in abnormal playback. When outputting Deep Color or 1080p, etc., we recommend you use a “High Speed HDMI cable”...
Page 10
ENGLISH Set up speakers Turn on power (Audyssey ® Auto Setup) Turn on the TV and subwoofer power. The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey Auto Setup”.
Page 11
ENGLISH Set up speakers (Audyssey ® Auto Setup) About setup microphone placement Set up the microphone Set up the remote control unit Mount the setup microphone on a tripod or stand n Set up the zone mode • Measurements are performed by placing the setup microphone and place it in the main listening position.
Page 12
ENGLISH Set up speakers (Audyssey ® Auto Setup) STEP 1 STEP 2 STEP 3 Preparation Speaker Detection Measurement • In STEP 2, you will perform measurements at the • In STEP 3, you will perform measurements at NOTE Connect the setup microphone to the main listening position.
Page 13
ENGLISH Set up speakers (Audyssey ® Auto Setup) STEP 4 STEP 5 STEP 6 Finish Calculation Check Store Unplug the setup microphone from ENTER to select the item you want Select “Store” and then press On the screen, use STEP 3 the unit’s SETUP MIC jack.
ENGLISH Error messages Parameter Check An error message is displayed if Audyssey ® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. This function enables you to check the measurement results and If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey Auto Setup over again. equalizer characteristics after Audyssey Auto Setup.
Page 15
ENGLISH Play back disc When power is switched to standby Press to switch an input source POWER OFF Press for a player used for playback. GPower indicator status in standby modeH Play the component connected to • Normal standby : Off this unit.
ENGLISH Basic version Basic version Here, we explain the connections and basic operation methods for this unit. F Connections vpage 13 F Playback (Basic operation) vpage 21 F Selecting a listening mode (Surround mode) vpage 29 n Refer to the pages indicated below for information on connecting and playing back the various media and external devices.
ENGLISH Connections Important information • Make connections as follows before using this unit. Select an appropriate connection type NOTE according to the components to be connected. • Do not plug in the power cord until all connections have been completed. •...
ENGLISH About ARC (Audio return channel) function Connecting an HDMI-compatible device The Audio Return Channel in HDMI 1.4a enables a TV, via a single HDMI cable, to send audio data You can connect up to six HDMI-compatible devices to the unit. “upstream”...
ENGLISH Connecting an HDMI-compatible device Connecting a TV • Select the connector to use and connect the device. • For video connections, see “Converting input video signals for output (Video conversion function)” • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an (vpage 13).
ENGLISH Connecting a DVD player Connecting a set-top box (Satellite tuner/cable TV) • You can enjoy video and audio from a DVD. • You can watch satellite or cable TV. • Select the connector to use and connect the device. •...
ENGLISH Connecting a digital video recorder NOTE To record video signals through this unit, use the same type of video cable for connection between this • You can record video onto a Blu-ray Disc or DVD. unit and the player as used for connection between this unit and the recorder. •...
DENON control dock for iPod. • When you want to playback a video file stored on an iPod, use a DENON control dock for iPod (ASD-1R, ASD-11R, ASD-3N, ASD-3W, ASD-51N and ASD-51W, sold separately) (vpage 18 “Connecting a control in Set as Necessary dock for iPod”).
ENGLISH Connecting a CD player Connecting an antenna • You can enjoy CD sound. • Connect the FM antenna or AM loop antenna supplied with the unit to enjoy listening to radio broadcasts. • Select the connector to use and connect the device. •...
ENGLISH Connecting a external power Connecting an external control device amplifier REMOTE CONTROL jacks TRIGGER OUT jacks • You can use this unit as a pre-amp by connecting a commercially available power amp to the PRE OUT connector. Adding a power amp If this unit is installed in a location that is out of range of the signal When a device with TRIGGER IN jack is connected, the connected to each of the channels provides an even greater sound presence.
ENGLISH Playback (Basic operation) n Using the “Source Select” menu Adjusting the master volume SOURCE SELECT n Selecting the input source (vpage 21) Press VOL df to adjust the volume. Display the “Source Select” menu. n Adjusting the master volume (vpage 21) The currently selected input n When the “Volume Display”...
Browse mode Remote mode (vpage 18 “Connecting a control dock for iPod”). Make the necessary settings on the player (language setting, Set the iPod ® in the DENON control dock for iPod. Music file subtitles setting, etc.) beforehand. Playable POWER ON...
Page 27
• Depending on the type of iPod and the software version, some MEMORY Store memory functions may not operate. iPod equipped with a slide show or video function. • Note that DENON will accept no responsibility whatsoever for any TV POWER TV power on/standby (Default : SONY) Press and hold SEARCH...
Page 28
• There are two modes for displaying the contents recorded on the You can use the USB cable provided with the iPod ® to connect the • Note that DENON will accept no responsibility whatsoever for any iPod. problems arising with the data on an iPod when using this unit in iPod with the unit’s USB port and enjoy music stored on the iPod.
ENGLISH Playing an iPod ® Tuning in radio stations iPod play function n Presetting radio stations (Manual preset) Listening to FM/AM broadcasts iPod PLAY is pressed when power of this unit is on standby and a Your favorite broadcast stations can be preset so that you can tune Press TUNER to switch the input...
Page 30
ENGLISH Tuning in radio stations RDS (Radio Data System) PTY (Program Type) n Listening to preset stations PTY identifies the type of RDS program. SHIFT RDS (works only on the FM band) is a broadcasting service which Press to select the memory The program types and their displays are as follows: allows a station to send additional information along with the regular block (A to G).
Page 31
ENGLISH Tuning in radio stations n PTY search TP (Traffic Program) RT (Radio Text) Use this function to find RDS stations broadcasting a designated program type (PTY). TP identifies programs that carry traffic announcements. RT allows RDS stations to send text messages that appear on the This allows you to easily find out the latest traffic conditions in your display.
48 – 192 kbps .wma Media Audio) NOTE MP3 (MPEG-1 • Note that DENON will accept no responsibility whatsoever for any 32/44.1/48 kHz 32 – 320 kbps .mp3 Audio Layer-3) problems arising with the data on a USB memory device when using MPEG-4 AAC 32/44.1/48 kHz...
The surround effects suitable for the source type or according to your Assign” (vpage 58) or “Speaker Config.” (vpage 58). Surround surround playback liking can be selected from the DENON original sound mode and is used (vpage 31) for playback. Multi channel This mode is for 7.1-channel surround playback DOLBY PLgz using the front height speakers.
Page 34
ENGLISH Standard playback Displaying the currently playing surround mode GViews on the displayH Select the mode corresponding to the playback contents with the menu “Surround Parameter” – Input signal Surround mode Display DOLBY DIGITAL “Mode” (vpage 53) to enjoy your favorite sound DOLBY DIGITAL DOLBY DIGITAL EX mode.
When in the PURE DIRECT mode, the menu screen is not displayed. to achieve a sound field suited to your tastes. NOTE When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or DTS Express, you cannot select DENON original surround mode.
ENGLISH Advanced version Advanced version Here, we explain functions and operations that let you make better use of this unit. F Speaker installation/connection (Other than 7.1-channel system with surround back speakers) vpage 33 F Playback (Advanced operation) vpage 39 F Playback in ZONE2 (Separate room) vpage 42 F How to make detailed settings vpage 44 F Operating the connected devices by remote control unit vpage 67...
ENGLISH Speaker installation/connection (Other than 7.1-channel system with surround back speakers) This section provides the installation, connection, and setup methods of speaker systems other than the 7.1-channel system (with surround back speakers). For the speaker installation, connection, and setup methods of the 7.1-channel system with surround back speakers, see “Simple version (Simple setup guide)” (vpage 3).
ENGLISH Connect • For the method of connecting the 7.1-channel system with surround back speakers, see page 4. 6.1-channel (Surround back speaker) connection • For the method of connecting the TV, see page 5. If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the 7.1-channel (Front height speaker) connection SURR.
Page 39
ENGLISH Connect 5.1-channel connection Front A/B connection 2.1-channel connection For 5.1-channel playback, set “Amp Assign” in “Set up speakers” The second set of front speakers can be connected to the SURR. (vpage 37) to “Normal”. BACK/AMP ASSIGN terminals. In this case, set “Amp Assign” of “Set up speakers” (vpage 37) to “Front B”.
Page 40
ENGLISH Connect Bi-amp connection 5.1-channel + 2.1-channel connection A bi-amp connection is to connect separate amplifiers to the tweeter terminals and woofer terminals of If front speakers for 2-channel playback are connected to the SURR. BACK / AMP ASSIGN terminals, speakers compatible with the bi-amp function.
ENGLISH Set up speakers around items indicate the settings. This section provides the setup methods of speaker systems other than the 7.1-channel system (with surround back speakers). For the setup methods of the 7.1-channel system with surround back speakers, see “Set up speakers (Audyssey ® Auto Setup)” (vpage 6) of “Simple version”. First install and connect the speakers to this unit.
Page 42
ENGLISH Set up speakers GWhen “Subwoofer” is selected in Set up “Channel Select” step 6H to select the item. to select “Channel Select”, ENTER and then press Measure Set for measuring a subwoofer. Skip AUTO SETUP Set for no measuring of a subwoofer. AUDYSSEY AUTO SETUP MultEQ STEP1 Preparation...
ENGLISH Playback (Advanced operation) Convenient functions Enable the HDMI control function of this unit. Playback (Basic operation) (vpage 21) Set “HDMI Control” (vpage 61) to “ON“. HDMI control function Turn the power on for all the equipment connected Selecting a listening mode (Surround mode) by HDMI cable.
ENGLISH Convenient functions Sleep timer function Adjusting the volume of the speakers n Adjusting the volume of group of speakers (Fader function) The power automatically goes into standby once the set time has You can adjust the channel level either according to the playback This function lets you adjust (fade) the sound all at once from the elapsed.
Page 45
ENGLISH Convenient functions Quick select function ZONE2/REC SELECT SOURCE SELECT • To cancel, press , then turn • The Quick Select function can be set separately for the different All of the settings in step 1 can be memorized together. By memorizing until “ZONE2 Source”...
ENGLISH Convenient functions Playback in ZONE2 (Separate room) Various memory functions • You can operate this unit so as to enjoy audio in a room (ZONE2) w ZONE2 playback by audio output n Personal memory plus function other than the MAIN ZONE (room where the unit is located). •...
ENGLISH Adjusting the volume Playback Quick select function VOL df to adjust the volume. ZONE SELECT It is also possible to save three settings for ZONE2. Switch to “ZONE2”. GAdjustable rangeH – – – –80dB – –40dB – 18dB n Saving the settings The remote control unit switches to the (When the “Volume Display”...
ENGLISH How to make detailed settings Menu map Setting items Detailed items Description Page Adjusts various audio parameters. 1. Audio/Video Adjust Audio Adjust For menu operation, connect a TV to this unit and Adjusts the picture quality. Picture Adjust display the menu on the TV screen. For menu AUDIO/VIDEO ADJUST operations, see the following page.
ENGLISH Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu Display Front Display Description Top menu display q The menu items are displayed here. MENU w The selected line is displayed here.
Inputting characters “Preset Name” (vpage 4 9), “Rename” (vpage 5 1), “Zone Rename” Using the number buttons Example: For changing the input source from “DVD” to “DENON” (vpage 65), and “Quick Select Name” (vpage 65)can be changed as q Place the cursor at “V”.
ENGLISH Inputting characters Input Setup Keyboard screen Display the screen for inputting characters. Perform settings related to input source playback. (vpage 44 “Menu map”) • You do not have to change the settings to use the unit. Make n Display of a keyboard input screen settings when needed.
Page 52
ENGLISH Input Setup Items that can be set with the Input Setup procedure Important information Auto Preset (vpage 48) Preset Skip (vpage 48) Preset Name (vpage 49) n About the display of input sources INPUT SETUP INPUT SETUP INPUT SETUP AUTO PRESET PRESET SKIP PRESET NAME [1/7] [1/7]...
Page 53
ENGLISH Input Setup Preset Name Setting items Setting details HDMI HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 Assign name to a preset memory. Set this to change the HDMI None : Do not assign an HDMI input connector to the selected input Setting items Setting details input connectors assigned...
Page 54
ENGLISH Input Setup Setting items Setting details Setting items Setting details Component 1-RCA / 2-RCA (Component video) Video Mode Auto : Process video automatically based on the HDMI content Set this to change the None : Do not assign a component video input connector to the selected Make settings for video information.
Page 55
ENGLISH Input Setup Input Mode Setting items Setting details Default settings are underlined. Resolution Auto : The number of pixels the TV connected to the HDMI output The input modes available for selection may vary depending on the input source. Set the output resolution.
Items that can be set with the Audio/Video Adjust procedure DOCK USB/iPod OFF : Shuffle playback mode is canceled. n For iPod playback (When DENON control dock for iPod ASD-3N, ASD- 3W, ASD-51N or ASD-51W is connected) Audio Adjust (vpage 53) ON : Shuffle playback mode is enabled.
ENGLISH Audio/Video Adjust Audio Adjust Setting items Setting details Panorama ON : Set. n Surround Parameter Assign front L/R signal also OFF : Do not set. Default settings are underlined. to surround channels for Adjust surround sound parameters. It may not be possible to set this item depending on the input signal wider sound.
Page 58
ENGLISH Audio/Video Adjust Setting items Setting details Setting items Setting details n For 2-channel sources S.Back Height Gain Low : Reduce the front height channel volume. Sets the method of Control the front height Mid : Front height channel sound is output with standard sound volume. ON : The surround back channel is used.
Page 59
ENGLISH Audio/Video Adjust n Audyssey Settings Default settings are underlined. Setting items Setting details Dynamic EQ ® Set MultEQ ® , Dynamic EQ ® and Dynamic Volume ® . These can be selected after Audyssey ® Auto ON : Use Dynamic EQ. Solve the problem of OFF : Do not use Dynamic EQ.
Page 60
ENGLISH Audio/Video Adjust n Manual EQ Setting items Setting details Default settings are underlined. Dynamic Volume ® Midnight : Most adjustment to softest and loudest sounds. Use the graphic equalizer to adjust the tone of each speaker. “Manual EQ” can be set when “MultEQ ® ” setting (vpage 55) is “Manual”. Solve the problem of large Evening : Medium adjustment to loudest and softest sound.
Page 61
ENGLISH Audio/Video Adjust n RESTORER Picture Adjust Default settings are underlined. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce SAT/CBL GAME V.AUX • This item can be set when the input source is the amount of data by eliminating signal components that are hard for the human ear to hear. The DOCK .
ENGLISH Speaker Setup Manual Setup Default settings are underlined. Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup. or other settings. •...
Page 63
ENGLISH Manual Setup Setting items Setting details Setting items Setting details Speaker Config. Surround : Set the presence and size of the surround speakers. Bass Setting SW Mode : Select low range signals to be reproduced by subwoofer. (Continued) • Large : Use a large speaker that can adequately play back low Set subwoofer and LFE •...
Page 64
ENGLISH Manual Setup Setting items Setting details Setting items Setting details Distance Default : The “Distance” settings are returned to the default settings. Crossover Frequency Crossover : Set the crossover frequency. (Continued) • Yes : Reset to the defaults. Set the maximum frequency •...
ENGLISH Manual Setup HDMI Setup Setting items Setting details Default settings are underlined. Power Off Control All : If power to a connected TV is turned off independently of the input Make settings for HDMI video/audio output. Links the power standby source, power to this unit is automatically set to standby.
Page 66
ENGLISH Manual Setup Setting items Setting details Setting items Setting details 2ch Direct/Stereo Crossover : Set the maximum frequency of the bass signal output from EQ Customize Audyssey Byp. L/R : Set when not using “Audyssey Byp. L/R” equalizer. (Continued) each channel to the subwoofer.
Page 67
ENGLISH Manual Setup ZONE2 Setup Setting items Setting details Default settings are underlined. Power On Level Last : Use the memorized setting from the last session. Set the audio to play back with ZONE2. Define the volume setting – – – (0) : Always mute when power is turned on. that is active when the –80dB –...
Page 68
• The “Volume Display” setting is applied also to the “Volume Limit” and • Picture : Set the background to a picture (DENON logo). “Power On Level” display method. • Black : Set the background to black.
Page 69
• OFF : Turn display off. maintenance from a DENON service engineer or custom iPod : Set the iPod screen display time when the input source is “DOCK” Only use this function if so instructed by a DENON serviceperson or installer. installer. or “USB/iPod”. Dimmer Bright : Normal display brightness.
ENGLISH Information Items Setting details Quick Select Quick Select 1 / Quick Select 2 / Quick Select 3 / ZONE2 Quick Select 1 / Show information about receiver settings, input signals, etc. Show information about ZONE2 Quick Select 2 / ZONE2 Quick Select 3 •...
ENGLISH Operating the connected devices by remote control unit Registering the supplied preset codes in the remote control unit Registering preset codes Input Devices controllable with the remote enables you to operate devices made by other manufacturers. Input source source control unit When preset codes are registered in the included remote control unit, of this unit...
Page 72
Press to set the remote control unit to amplifier Category Brand Preset code Blu-ray button operation mode. CD Recorder Blu-ray Disc player DENON 32258 CABLE CABLE/PVR Press MENU DVD player DENON 32134 DVD Recorder The menu is displayed on the TV screen.
ENGLISH n CD player / CD recorder operation n TV operation Operating components Operation buttons Function Operation buttons Function The supplied remote control unit can control a component other than ZONE/DEVICE ON Power onz ZONE/DEVICE ON Power onz this unit. ZONE/DEVICE OFF Power standbyz ZONE/DEVICE OFF...
ENGLISH Specifying the zone used with the Information remote control unit Information ZONE SELECT When the button is pressed, only the set zone can be operated with the remote control unit. Press and hold POWER ON Here, we list various information related to this unit. ZONE/DEVICE ON for at least 3 Please refer to this information as needed.
ENGLISH Part names and functions Front panel Display For buttons not explained here, see the page indicated in parentheses ( ). Q3 Q2 r t y W0 W1 W2 W6 W7 W8 Input signal indicators AUDYSSEY indicators Lighting is as follows, depending on the setting Input signal channel indicators of “Dynamic EQ”...
ENGLISH Display Rear panel Tuner reception mode indicators See the page indicated in parentheses ( ). These light according to the reception conditions when the input source is set to “TUNER”. STEREO : In the FM mode, this light when receiving analog stereo broadcasts.
ENGLISH Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). ZONE/DEVICE power buttons ············ (43, 67) ENTER button ····································· (45 – 47) Zone mode indicators ·························· (43, 67) RESTORER button ······································ (57) Input source select buttons ················· (21, 43) Pure direct button (PURE) ·························...
Page 79
ENGLISH Remote control unit Inserting the batteries Operating range of the remote control unit Point the remote control unit at the remote sensor when operating it. q Slide the rear lid in the w Load the two batteries direction of the arrow and properly as indicated by remove it.
ENGLISH Other information Trademark information “Made for iPod” and “Made for n Trademark information (vpage 76) iPhone” mean that an electronic This product uses the following technologies: accessory has been designed to n Surround (vpage 77) connect specifically to iPod, or iPhone, n Relationship between video signals and monitor Manufactured under license from respectively, and has been certified...
ENGLISH Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each surround mode. Symbols in the table S This indicates the audio output channels or surround parameters that can be set.
Page 82
ENGLISH Surround Surround Parameter (vpage 53) Audyssey Settings z20 (vpage 55) NEO:6 Music PRO LOGIC g/gx Music mode only mode only Tone RESTORER AFDM F.Height Surround mode (vpage 29) S.Back Height Gain Subwoofer Dynamic Dynamic EQ ® (vpage 54) MultEQ ® Volume ® (vpage 57) (vpage 54) (vpage 54) (vpage 54)
Page 83
ENGLISH Surround n Types of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table F This indicates the default surround mode.
Page 84
ENGLISH Surround Input signal types and formats DTS-HD DOLBY DOLBY DIGITAL DTS-HD DOLBY Surround mode (vpage 29) NOTE DTS-HD DTS ES DTS ES DOLBY DOLBY DOLBY DOLBY ANALOG LINEAR PCM LINEAR PCM High DOLBY DOLBY DIGITAL EX Master DSCRT MTRX DTS 96/24 DIGITAL EX DIGITAL DIGITAL...
ENGLISH Relationship between video signals and monitor output MAIN ZONE MONITOR OUT Input Signals Output Signals Menu displayed Video Convert HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO A z2 Wall paper Only the menu is displayed A z2 VIDEO VIDEO VIDEO...
ENGLISH Explanation of terms Dolby Digital DTS Digital Surround Dolby Pro Logic gx Dolby Digital is a multi-channel digital signal format DTS Digital Surround is the standard digital surround Dolby Pro Logic gx is a further improved version of Adobe RGB color / Adobe YCC601 color developed by Dolby Laboratories.
Page 87
ENGLISH Explanation of terms DTS NEO:6™ Surround DTS NEO:6™ is a matrix decoding technology Progressive (sequential scanning) x.v.Color achieving 6.1-channel surround playback This is a scanning system of video signal that This function lets HDTVs display colors more with 2-channel sources. It includes “DTS NEO:6 displays 1 frame of video as one image.
• If “Front” and “Center” for “Speaker Config.” are set to “Large”, 58, 59 power, the power contact the DENON service adviser. and “SW Mode” is set to “LFE”, no sound may be output from indicator is blinking the subwoofers, depending on the input signal or selected red in intervals of surround mode.
Page 89
ENGLISH GHDMIH GUSB memory deviceH Symptom Cause/Solution Page Symptom Cause/Solution Page No audio is • Check the connection of the HDMI connectors. When a USB • The set cannot recognize a USB memory device. Check the output with HDMI • When outputting HDMI audio from the speakers, set “HDMI memory device is connection.
ENGLISH Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. ON/STANDBY SURROUND MODE 1 SURROUND MODE 0 ON/STANDBY Turn off the power using Press ON/STANDBY...
ENGLISH Specifications n Audio section n General • Power amplifier Power supply: AC 230 V, 50 Hz Rated output: Front: Power consumption: 600 W 0.1 W (Standby) 105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 1.9 W (CEC standby) 135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Maximum external dimensions:...