Tuning In Radio Stations - Denon AVR-2311 Owner's Manual

iPod play function
iPod PLAY
If is pressed when power of this unit is on standby and a
control dock for iPod or an iPod (USB) is connected, the iPod starts
playback.
iPod PLAY
Press .
• Power of this unit is turned on.
• This unit's input source switches to
"DOCK" or "USB/iPod".
• iPod playback starts.
iPod PLAY
If on the main unit is
pressed, the same function as with the
remote control unit can be obtained.
NOTE
• iPod play function does not function if a control dock for iPod
("DOCK") or an iPod ("USB/iPod") is not connected.
• If both a control dock for iPod ("DOCK") and an iPod ("USB/iPod")
are connected, playback with control dock for iPod ("DOCK") takes
priority.
Playing an iPod ®

Tuning in radio stations

Listening to FM/AM broadcasts
1
Press TUNER
source to "TUNER".
2
BAND
Press
"AM".
FM When listening to an FM broadcast.
AM
When listening to an AM broadcast.
3
Tune in the desired broadcast
station.
q To tune in automatically
(Auto tuning)
MODE
Press to light the "AUTO" indicator on the display, then
TUNING d
use or
hear.
w To tune in manually (Manual tuning)
MODE
Press to turn off the display's "AUTO" indicator, then use
TUNING d TUNING f
or
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
TUNING f
to change frequencies continuously.
• You can specify the duration of the on-screen display to be displayed
(default: 30 sec) at menu "TUNER" (vpage 65). Press
return to the original screen.
to switch the input
to select "FM" or
TUNING f
to select the station you want to
to select the station you want to hear.
TUNING d
or
uio p
to
n Presetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
• Stations can be preset automatically at "Auto Preset"
(vpage 48). If "Auto Preset" is performed after performing "Manual
Preset", the "Manual Preset" settings will be overwritten.
1
Tune in the broadcast station you
want to preset.
2
Press MEMORY .
3
Press SHIFT to select the block
(A to G) in which to preset the
channel (1 to 8 per block), then
CH + CH – 1 – 8
press , or to select
the preset number.
4
Press MEMORY again to complete the setting.
• To preset other stations, repeat steps 1 to 4.
Default settings
Block (A – G)
and Default Settings
Channel (1 – 8)
87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 /
A1 – A8
90.1 MHz
522 / 603 / 999 / 1404 / 1611 kHz,
B1 – B8
90.1 / 90.1 / 90.1 MHz
C1 – C8 90.1 MHz
D1 – D8 90.1 MHz
E1 – E8 90.1 MHz
F1 – F8 90.1 MHz
G1 – G8 90.1 MHz
Specify a name for the preset broadcast station
(Preset Name) (vpage 49)
ENGLISH
25