Denon AVR-2311 Owner's Manual page 60

ENGLISH
Audio/Video Adjust
Setting items
Dynamic Volume ®
Midnight : Most adjustment to softest and loudest sounds.
Solve the problem of large Evening : Medium adjustment to loudest and softest sound.
variations in volume level Day : Least adjustment to loudest and softest sounds.
between TV, movies and OFF : Do not use the "Dynamic Volume".
other content (between
quiet passages and
•
loud passages, etc.) by
automatically adjusting to
• If "Dynamic Volume" is set to "Yes" in Auto Setup (vpage 9), the
the user's preferred volume
setting is automatically changed to "Evening".
setting.
• Buttons on the remote control unit or main unit
can be used for operations.
GOperations with the remote control unitH
Press
Each time
changed as shown below.
Dynamic EQ : OFF
Dynamic Volume : OFF
GOperations with the main unitH
Press
Each time
pressed, the setting is changed as
shown below.
56
Remote control operation
buttons
Setting details
is displayed when set to "ON".
DYN EQ/VOL
.
DYN EQ/VOL
is pressed, the setting is
Dynamic EQ : ON Dynamic EQ : ON
Dynamic Volume : Midnight Dynamic Volume : Evening
Dynamic EQ : ON Dynamic EQ : ON
Dynamic Volume : OFF Dynamic Volume : Day
DYNAMIC VOLUME
.
DYNAMIC VOLUME
is
Dynamic Volume : OFF Dynamic Volume : Midnight
Dynamic Volume : Day Dynamic Volume : Evening
Move the cursor
(Up/Down/Left/Right)
n Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ ® " setting (vpage 55) is "Manual".
Setting items
Adjust CH q Select the speaker tone adjustment method.
Correct the tone of each All : Adjust the tone of all speakers together.
speaker.
L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Base Curve Copy Yes : Copy.
Copy "Audyssey Flat" curve No : Do not copy.
from MultEQ.
"Base Curve Copy" is displayed after Audyssey Auto Setup has been
performed.
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
settings.
Confirm the setting
Default settings are underlined.
Setting details
Return to previous menu