Table of Contents
Advertisement
ENGLISH
Other Functions
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<5>
ON/STANDBY
< 8/–, +/9 >
[TUNER]
[CD 1/3]
MENU/SET
[CLOCK]
Convenient Functions
BUTTON
<BUTTON>
Auto Power On
[BUTTON]
When the power is in standby, the power turns on when
any of the buttons below other than ON/STANDBY is
1/3
MENU/SET
operated, and the respective operation is performed.
<5> ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙
•
•
1/3
for the different functions
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙
[TUNER]∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙
•
NOTE
The Auto Power On function cannot be used with iPods.
Auto Function Selector Function
When one of the buttons below is pressed, the function
switches to the respective function and playback of that
source starts.
[CD 1/3] ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙
•
ON/STANDBY
[USB 1/3]
•
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ The function switches to
[iPod 1/3] ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙
•
[TUNER] ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙
•
Last Function Memory
This stores the settings as they were directly before the
[USB 1/3]
standby mode was set.
When the power is turned back on, the settings are
restored to as they were directly before the standby mode
was set.
[iPod 1/3]
[o p]
The disc tray opens.
Playback of that source starts.
Playback of the tuner starts.
"
"
The function switches to
CD
and the
CD starts playing.
"
"
USB
and the
USB starts playing.
"
"
The function switches to
AUX1/Dock
and the iPod starts playing.
"
"
The functions switches to
TUNER
and
the band last set is tuned in.
Resetting the Microprocessor
Perform this procedure if the display is abnormal or if
operations cannot be performed.
When the microprocessor is reset, all the settings are
reset to their default values.
1
Unplug the power cord.
2
Plug the power cord into a power outlet while pressing
<8/–>
<MENU/SET>
and
simultaneously.
3
[CLOCK]
Press
.
The "AM12:00" display flashes.
If "AM12:00" is not flashed in step 3, start over from step 1.
Using an Optimizing Filter
An optimizing filter suited for the properties of the speakers
(SC-M37) can be used.
1
MENU/SET
Press
to select "SP OPTIMISE".
2
<8/–
+/9>
[o p]
Use
,
or
"OFF".
3
MENU/SET
Press
to set.
[Selectable items]
ON
: The response is optimized for the speakers (SC-M37 ,
supplied).
OFF
: The response is flat.
When the function is set to iPod, the set cannot be switched between
on and off.
to select "ON" or
Hide quick links:
Advertisement
Table of Contents
