Protrudent/Bumpy Paper - Dell E525w User Manual

Protrudent/Bumpy Paper

Action
1
Clean up the fusing unit.
Load one sheet of paper in the standard 150 sheet tray, and then print
a
a solid image all over paper.
Load the printed sheet with the side to be printed on facing down,
b
and then print a blank sheet of paper.
Is the problem recovered?
Jam
Misfeed Jam
Action
1 Ensure that paper is properly loaded in the standard 150 sheet tray.
Is the problem recovered?
2a Use thick paper that is 163 g/m
Is the problem recovered?
2b Use thin paper that is 60 g/m
Is the problem recovered?
2c Ensure that the envelope is properly loaded in the standard 150 sheet
tray as instructed in "Loading Envelopes" on page 171.
Is the problem recovered?
300
Troubleshooting
2
or less.
2
or more.
Yes No
The task is complete. Contact Dell.
Yes No
The task is complete. Proceed to the action
corresponding to the
type of the print media
being used:
• Thick - 2a
• Thin - 2b
• Envelope - 2c
If performing manual
duplex printing, go to
action 2d.
If using paper other
than the above or if not
performing duplex
printing, go to action
2e.
The task is complete. Go to action 3a.
The task is complete. Go to action 3a.
The task is complete. Go to action 3b.