Dell E525w User Manual page 98

Values:
*1
Ethernet
Port Status
*1
This item is available only when the printer is connected with a wired network.
Wireless LAN
Purpose:
To configure wireless network settings.
To connect the printer to a wireless network, be sure to disconnect the Ethernet cable.
NOTE:
Once wireless LAN is activated, wired LAN protocol will be disabled.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
98
Dell™ Printer Configuration Web Tool
Ethernet Settings
Current Ethernet Settings
MAC Address
LPD
Port9100
IPP
E-mail Alert
Bonjour (mDNS)
SNMP
EWS
WSD
SNTP
Google Cloud Print
*
Auto
10Base-T Half-Duplex
10Base-T Full-Duplex
100Base-TX Half-Duplex
100Base-TX Full-Duplex
Displays the current settings of Ethernet.
Displays the MAC address of the printer.
Specifies whether to enable LPD.
Specifies whether to enable Port9100.
Sets whether to enable IPP.
Specifies whether to enable the E-mail Alert feature.
Specifies whether to enable the Bonjour (mDNS) feature.
Specifies whether to enable the SNMP.
Specifies whether to enable the Dell Printer Configuration Web
Tool.
Specifies whether to enable the Web Services on Devices (WSD)
port.
Sets whether to enable SNTP.
Sets whether to enable Google Cloud Print.
Detects Ethernet transmission
rate and the duplex settings
automatically.
Selects 10Base-T Half-Duplex as
the default value.
Selects 10Base-T Full-Duplex as
the default value.
Selects 100Base-TX Half-Duplex
as the default value.
Selects 100Base-TX Full-Duplex
as the default value.