Configuring The Paper Trays - Dell 1710 User Manual

Trays for more information.

Configuring the Paper Trays

NOTE: You must first install the drivers for your printer before configuring the paper trays. See
Setting Up for Local Printing
Dell Laser Printer 1710/1710n
1. Launch the Dell Local Printer Settings Utility (Start Programs Dell Printers Dell Laser Printer
1710 Dell Local Printer Settings Utility).
2. Select your Dell Laser Printer 1710.
3. Click OK.
4. In the left column, click Paper.
5. In the right column, go to the Tray 1 section. Specify what size and type of media you loaded into tray
1.
6. In the right column, go to the Tray 2 section. Specify what size and type of media you loaded into tray
2.
7. On the Menu Bar, click Actions Apply Settings.
8. Close the utility.
NOTE: If you change the size or type of media loaded into either tray, use the Local Printer Settings
Utility to reconfigure the tray.
9. To update your printer options, follow the instructions in the table.
Windows XP 1.
2.
3.
4.
Windows 2000 1.
Windows NT
2.
4.0
3.
4.
Windows Me 1.
Windows 98 SE
2.
3.
4.
If Update or Ask Printer is unavailable, follow these steps:
a.
b.
or Setting Up for Network
Click Start Control Panel Printers and Other Hardware Printers and
Faxes.
Right-click the Dell Laser Printer 1710 icon.
Click Properties Installed Options Ask Printer.
Click OK OK. Close the Printers folder.
Click Start Settings Printers.
Right-click the Dell Laser Printer 1710 icon.
Click Properties Installed Options (or Options) Ask Printer (or Update
Now).
Click OK OK. Close the Printers folder.
Click Start Settings Printers.
Right-click the Dell Laser Printer 1710 icon.
Click Properties Device (or Features) Update (or Update Now).
Click OK OK. Close the Printers folder.
Printing.